This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap, otherwise known as PMAC motor. Commutation is acheived by an internal Sine/Cosine speed sensor. Input Voltage of 24-48 VDC. 100 Amps continuous, up to 300 Amps for 30 seconds at 48 VDC. This motor has a built-in bi-directional cooling fan and internal temperature sensor. Motor weight is 22 pounds.
This is a direct replacement for the Motenergy ME0201013001 and ME0907 motors. It is also a bolt-in replacement for the Brigs & Staratton Etek motor.
This Brushless motor requires a 3 Phase 8 Pole PMAC controller.
These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. NOTE: We do not recommend the use of square wave controllers with these motors. This may reduce durability and efficiency of the motor, as well as void it's warranty.
High 90% Efficiency
Low torque ripple at low speed
NEW Bi-directional fan for increased air flow
NEW Sine/cosine speed sensor
NEW Aluminum fan cover
Power: 6 Hp continuous, 19 peak Hp
Voltage: 24-48V DC
Maximum RPM: 5000
Torque Constant: 1.20" lbs/amp.
Peak Stall Torque: 38 Nm.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Phase to Phase winding resistance: 0.013 Ohms
Inductance Phase to Phase: 0.10 Milli-Henry
Armature Inertia: 52 Kg Cm Squared
20 turns per phase
Weight: 22 lbs
|Country of Manufacture||China|