High Current Model: These meters are designed for high powered Personal Electric Vehicles. They give valuable information like speed, current, voltage, watts, cycles. Includes Shunt.

Cycle Analyst

$175

* Remote Shunt: Unlike the watt-meters and amp-hour meters designed for RC hobbyists, the Cycle Analyst uses a remote shunt for sensing current rather than running wire through the meter, so you do not need to route heavy gauge battery cables up to the handlebar and back.
* Backlit LCD: The display readout is well illuminated for night riding.
* Water Resistant: The circuitry is fully enclosed in a sealed box enabling it to withstand exposure to wet and rainy conditions.
* Handlebar Mounting: Easily attaches to handlebar tubes from 7/8" to 1 ¼" diameter with included hardware.
* Save on Power Down: Trip data such as amp-hours and distance are saved when the meter is shut off, and are restored when power is re-applied.
* Fwd and Negative Amps: Both positive and negative amp-hours are displayed separately, so you can calculate accurate regenerative braking statistics or use it to monitor charging currents as well.
* Wide Voltage Range: Operates from 15V to 100V, accommodating the vast majority of all small electric vehicles. A high voltage option for use up to 200V is available on special request.
* Flexible Speed Input: Detects vehicle speed either with a magnet and sensor cable or through the hall effect signal on brushless motor controllers.