Electric Motorsport drive kits save you time and money by providing all of the necessary components needed to build an electric drive system at a discounted price. We offer 2 different types of kits, unassembled do-it-yourself kits, as well as preassembled drive systems ready for immediate implementation.
Ordering a drive system is simple. First decide which motor best fits your preformance requirements, then choose your controller, type of throttle, and contactor coil voltage. In general, the contactor's coil voltage should match the nominal voltage of your battery pack.
We know that it may be difficult to decide which electric drive system will best suit your project and meet your performance expectations. Therefore, please review and submit a land vehicle worksheet or marine craft worksheet before you call or email us with questions about which product to choose. This will help us understand your requirements and provide you with the correct information.
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.
P/N: ME1012
PMAC-DSR 36/48V 450A
Brushless Drive
Kit
25 HP pk.
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor. P/N: ME0913
PMAC-DS 72/84V 350A
Brushless Drive
Kit
40 HP pk.
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor. P/N: ME0913
PMAC-DS 72/84V 550A
Brushless Drive
Kit
48 HP pk.
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
The EMC-SM300 (Mars ME1002) is a Series Wound DC motor perfect for lite truck and small car EV conversions. Continuous current of 200 amps, and 550 amps for 2 minutes. Voltages from 48 to 144 VDC. Efficiencies of up to 92%. The power is 26 KW (35 HP) continuous, and 63 KW (85 HP) peak. More powerful than the NetGain Warp 9 and ADC FB1-4001 motors.
