Click on an image above to enlarge in a new window ^
Agni B 95R
& Sigmadrive 72/80
Motor Drive Kit w/ Regen
72v, 350Amp Electric Drive System
Includes:
Agni B 95R Motor
Sigmadrive 72/80 Controller
Throttle (Twist-Grip or Pot Box)
Contactor w/ resistor & diode
Wire Kit
Fuse
Block & Fuse
It is highly recommended that you purchase a Sigmadrive Programming device to ensure proper functionality and efficiency of your drive system.
Availability: Due to production delays at the Agni Motors factory, curreny lead time is approximatley 6-8 weeks. Order now to reserve an Agni B 95R from our next shipment.
Price:
Description
This is a 72v Agni B 95R & Sigmadrive 72/80 electric motor drive kit by Electric Motorsport designed for electric vehicle builds, conversions, etc.
Kit Includes:
Agni B 95R
When you simply want the highest performing motor in it's class you get an Agni Motor. The latest version of this legendary DC brushed motor comes equipped with a negative temperature coefficient thermistor to ensure that in high performance applications current to the motor is cut back before overheating occurs. It also features adjustable brushes so you can run it with advanced timing in ether direction for more efficiency at high loads, conversely, the motor can be retarded to become a more efficient generator. This Agni motor is small yet strong and has been internally reinforced so it may be run up to an incredible 6000 RPM.This motor is ideally suited for 12-72 Volt DC drive systems. Works with most PM motor controllers. Great for Electrathons, Motorcycles, go-karts, ride-on trains, small planes, boats, or robots.
Features
Hi Torque 8" Diameter motor
Highest Power to Weight ratio
Kevlar banded for higher RPM performance.
Bi Directional rotation
Adjustable Timing
Easy brush maintenance
Specifications
Power: 8 count-- 30 pk hp
Voltage: 12-72VDC
Peak Efficiency: 93%
Max Amps (30 seconds): 400
Continuous Amps: 230
Max Speed: 6000 RPM>
Weight: 24 lbs.
- 7 off low impedance digital inputs
- 3 off high resolution analogue inputs
- 3 off protected contactor drivers (2 off on small frame versions)
- In-built coil suppression
- Short circuit and open circuit contactor detect
- Thermal current limit compensation
- Throttle mapping
- Electromagnetic brake control
- Emergency reverse / Belly button
- Programmable creep speed
- Inching facility
- Power steer timer
- Regenerative and plug braking
- Braking proportional to accelerator position
- Braking in neutral
- Brake pedal analogue input mode
- Under and over-voltage protection
- Throttle wire-off detection
- 3 traction cutback speeds
- Easy dual traction control via 2 controllers
- 6 Pump speeds with additive, priority and compensation
- Pump inhibit input
- Independent power steer speed and compensation
- +12V output pin
- Multiple hardware and software failsafe systems and watchdog
- Power On and Trip diagnostic LED indicators
Throttle 0-5k Ohm
EZ-GO "Pot Box" Potentiometer (Curtis PB-6 Style Pot box throttle)
Size: 4-3/4" x 4" x 2"
OR
Magura Twist-Grip Potentiometer Throttle
Fits onto a 20-22 mm standard diameter tubular handlebar
Contactor
Contactors (also known as solenoids) are used to connect and disconnect main battery buss power. When it is time to turn your vehicle on or off, the contactor will engage or disengage the power at the flip of a switch. This is very usefull in an emergency situation when main power needs to be turned off quickly and easily. It is highly recommended that an appropriate pre-charge resistor (included) and a contactor coil suppression diode (included) be used with any contactor system.
When adding this kit to your shopping cart, you will be prompted to choose a contactor coil voltage. Kits using a Sigmadrive or Alltrax controller must be paird with a contactor that matches the nominal voltage of the intended battery pack.
Wire kit
Electric Motorsport wire kit specifically designed for the Perm PMG-132 Kit.
=
Fuse and Holder
Electric Motorsport fuse block
Size: 5" x 1-5/8" x 1-5/8"
