Electric Motorsport drive kits save you time and money by providing all of the necessary components needed to build an electric drive system at a discounted price. We offer 2 different types of kits, unassembled do-it-yourself kits, as well as preassembled drive systems ready for immediate implementation.
Ordering a drive system is simple. First decide which motor best fits your preformance requirements, then choose your controller, type of throttle, and contactor coil voltage. In general, the contactor's coil voltage should match the nominal voltage of your battery pack.
We know that it may be difficult to decide which electric drive system will best suit your project and meet your performance expectations. Therefore, please review and submit a land vehicle worksheet or marine craft worksheet before you call or email us with questions about which product to choose. This will help us understand your requirements and provide you with the correct information.
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.
P/N: ME1012
PMAC-DSR 36/48V 450A
Brushless Drive
Kit
25 HP pk.
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor. P/N: ME0913
PMAC-DS 72/84V 350A
Brushless Drive
Kit
40 HP pk.
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor. P/N: ME0913
PMAC-DS 72/84V 550A
Brushless Drive
Kit
48 HP pk.
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.