Click on an image above to enlarge in a new window ^
EMC-R & Alltrax 4834
Motor Drive Kit
15 HP, 48v Electric Drive System
Includes:
EMC-R Motor
Alltrax 4834 Controller
Throttle (Twist-Grip or Pot Box)
Contactor w/ resistor & diode
Wire Kit
Fuse
Block w/ Fuse
EMC-R motors are
temporarily Out of Stock. Estimated ship date: 9/22/2011
Price:
Description
This is a 48v EMC-R & Alltrax 4834 electric motor drive kit by Electric Motorsport designed for electric vehicle builds, conversions, etc.
Electric Motorsport's EMC-R is the same motor used in the Native Z6 scooter electric motorcycle.
EMC-R Motor
- Brush-type Permanent Magnet DC motor.
- Light weight, high efficiency design.
- Designed for 24-48 VDC battery operated equipment.
- 150 amps continuous at 48V (300 amps for 1 minute)
- Capable of 4.8 KW continuous and 15 KW for 1 minute.
- Totally open, fan cooled motor.
- Runs in either direction
The R-Motor has the highest power/weight/dollar ratio available on the market for brushed PM motors. This motor is also a bolt-in replacement for the original Etek. Runs a little faster than the Perm and Lynch or Lemco motors.
Alltrax AXE 4834 Controller
24-48 Volts/300 amp
Size: 6-1/2" L x 5-3/4" W x 2-4/5" T
Throttle 0-5k Ohm
EZ-GO "Pot Box" Potentiometer (Curtis PB-6 Style Pot box throttle)
Size: 4-3/4" x 4" x 2"
OR
Magura Twist-Grip Potentiometer Throttle
Fits onto a 20-22 mm standard diameter tubular handlebar
Contactor
Contactors (also known as solenoids) are used to connect and disconnect main battery buss power. When it is time to turn your vehicle on or off, the contactor will engage or disengage the power at the flip of a switch. This is very usefull in an emergency situation when main power needs to be turned off quickly and easily. It is highly recommended that an appropriate pre-charge resistor (included) and a contactor coil suppression diode (included) be used with any contactor system.
Size: 3-3/8" x 3-1/2" x 4-1/8"
Wire kit
Electric Motorsport wire kit specifically designed for the EMC-R Kit.
=
Fuse and Holder
Electric Motorsport fuse block
Size: 5" x 1-5/8" x 1-5/8"
