EV Parts
Motors
Controllers
Throttles
Batteries
Chargers
Wires and Connectors
DC-DC Converters
Contactors
Books
Tools
Sprockets and Chains
Gauges

 

 

 

EV Parts > Motors > Perm Motor PMG 132

$925.00

The Perm PMG-132 is very similar to the Etek, but higher performance. It can produce 19.2 peak HP (10 minute rating). It has the same inner C-face mounting dimensions as the Etek and can be a drop in replacement.

Perm Electric Drive Kits

Perm Motor PMG-132

PERM-132 24 to 72 Volt Pancake Motor - More power than the Etek! Similar in size and weight to a Briggs & Stratton ETEK, but at the same voltage it has a 50% higher peak power output, a 40% higher torque constant and 120% more stall torque. The PMG 132 is a "pancake" style neutrally-timed, brushed, permanent magnet DC motor manufactured by Perm Motor in Germany. It is similar in design to the Lynch/LEMCO LEM-200 and Briggs & Stratton ETEK motors but more powerful. The armature is made of flat copper strips stacked together so there's no stack of steel laminations like in a traditional motor which gives the motor low cogging. Its high power, high efficiency and comparably small size make it a good choice for small electric vehicles, Electrathon vehicles, generators, go-kart's and robots.

Specifications:
Voltage 24 36 48 60 72
Current 110 A 110 A 110 A 110 A 110 A
Power 2.2KW 3.5KW 4.7KW 5.97KW 7.22KW
Speed 1080 1700 2300 2870 3480
Torque 20.5Nm 20.5Nm 20.5Nm 20.5Nm 20.5Nm

The motor's body is 222 mm (8.75") in diameter and 120 mm (4.72") long.

shaft is 19 mm (0.748") in diameter and 43 mm (1.69") long with key and threaded hole. *

Specifications:

Voltage: 24-72V
Weight: 24.8 lb

Angular-velocity constant: 50.2 rpm/V

Torque constant: 27 ozf·in/A

Terminal resistance: 0.025 Ohm

No-load current: 6A

Rotor Inertia: 1370 oz·in_  

Inductance: 19 µH  

Continuous current: 110A  

10 minute current: 200A

Terminals: 8mm

48V Performance Peak efficiency: 86%

Peak power: 19.1 hp

No-load angular velocity: 2380 r/min

Stall current: 960 A


Stall torque: 25600 ozf·in

72 V Performance Peak efficiency: 88.6% *
Peak power: 34.3 hp

No-load angular velocity: 3590 r/min

Stall current: 1440 A

Stall torque: 38500 ozf·I


 

 

Perm PMG-132 Drive Kits (24-72Volts)

This combination is similar to the Etek Kit but uses the German made Perm PMG-132 motor. These systems are rated at a bit more power then the Etek-R. This package at 72volt can produces 19 Peak HP. Kits includes ( Perm PMG-132 motor, choice of Alltrax or Sevcon controller, Choice of Magura twist grip or Curtis PB6 Style Potentiameter box, wire kit, hi power contactor, fuse and fuse block.

 
Motor Controller Throttle Contactor

Fuse

Wire Kit Regen RPM Peak Horse Power  
Perm PMG 132

Alltrax AXE 4834 (300Amp) 24 - 48 VDC

Magura twist grip

or

Curtis PB6 type pot box

White Roggers (600 amp peak)

 

Bussman Fuse block and fuse

 

10' 6GA Welding cable

Tinned copper Terminal Lugs

Shrink tube

Connectors

No 2400 15 hp

 

$1455

Perm PMG 132 Alltrax AXE 4844 (400Amp) 24 - 48 VDC

Magura twist grip

or

Curtis PB6 type pot box

White Roggers (600 amp peak)

Bussman Fuse block and fuse

10' 6GA Welding cable

Tinned copper Terminal Lugs

Shrink tube

Connectors

No 2400 15 hp

 

$1520

Perm PMG 132 Alltrax AXE 7234 (300Amp) 24 - 72 VDC

Magura twist grip

or

Curtis PB6 type pot box

White Roggers (600 amp peak)

Bussman Fuse block and fuse

10' 6GA Welding cable

Tinned copper Terminal Lugs

Shrink tube

Connectors

No 3600 19 hp

 

$1610

Perm PMG 132 Alltrax AXE 7245 (450Amp) 24 - 72 VDC

Magura twist grip

or

Curtis PB6 type pot box

White Roggers (600 amp peak)

Bussman Fuse block and fuse

10' 6GA Welding cable

Tinned copper Terminal Lugs

Shrink tube

Connectors

No 3600 19 hp

 

$1720

Perm PMG 132

Sevcon Millipak 4QD (325Amp) 24 - 48 VDC

Magura twist grip

or

Curtis PB6 type pot box

White Roggers (600 amp peak)

Bussman Fuse block and fuse

10' 6GA Welding cable

Tinned copper Terminal Lugs

Shrink tube

Connectors

Yes 2400 15 hp

 

$1580

 

 
 
You have .
SHOPPING CART | ABOUT US | RETURN&SHIPPING POLICIES | PRIVACY POLICY | BLOG | EV FORUMS | CONTACT

 

 

Electric Motorsport specializes in the sales and service of Personal Electric Vehicles as well supplying Electric Vehicle parts for EV Builders, Hobbyists, Educational institutions and Original Equipment Manufactures (OEM). These Electric Vehicle parts are used in electric motorcycles, cars, trucks, motor bikes, scooters, ATV's (quads), trikes, electrathon racers, bicycles, boats, plains, trains, robotics, as well as the film and television industry.

Electric Motorsport manufactures its own line of production electric motorcycles as well as doing custom Electric Vehicle builds.

Electric Motorsport's Electric Vehicles us NO gas, and have NO exhaust, which means NO emissions. That's right, NO smoke, NO fumes, and NO pollution. These vehicles are also quite which means NO noise pollution. Another advantage of pure electric vehicles is that they have much lower maintenance. There are No Oil changes, NO filters to change and NO carburetor to clean. It is also a lot easier to start and run these pure Electric Vehicles. There are NO starters to kick or engage and there is NO warm up required, just turn the key on and they are ready to ride

 
     
 

HOME | EV PARTS | MOTORS | ETEK | PERM 132 | AC INDUCTION | SEPEX | PMAC | EVT HUB | CONTROLLERS | ALLTRAX | SEVCON | THROTTLES | MAGURA | POT BOX | BATTERIES | SVR | B&B | THUNDER SKY | CHARGERS | ZIVAN | SONEIL | WIRES & CONECTORS | DC-DC CONVERTERS | CONTACTORS | BOOKS | SECRETS OF EL NINJA | TOOLS | SPROCKETS & CHAINS | GUAGES | ELECTRIC MOTORCYCLES | GPR-S | ELECTRIC SCOOTERS | EVT | EVT-A | OXYGEN | ELECTRIC ATV | ELECTRIC BOATS | ABOUT US | RETURN & SHIPPING | PRIVACY POLICY | BLOG | EV FORUMS | CONTACT EMS