Thunderstruck TSM2500 Charger 2.5kW, 24-180VDC

Be the first to review this product

$450.00

Waterproof Thunderstruck Chargers are power factor corrected chargers capable of being programmed for just about any battery chemistry. This allows you to have the optimal charging algorithm for your particular pack of batteries whether you are using AGM, Gel, Flooded SLA, Ni-Cad, NiMH, Lithium or any other rechargeable battery that may come on to the market in the future.

Thundestruck chargers are user programable through the EVCC charge controller (purchased separately)

Advantages
 
0. Free custom programming to your exact requirements included with every charger. Also free email technical support and half-price reprogramming for the life of the charger.
1. Internal integrated PFC, no pollution to electric network, minimizes disturbance on electric network from heavy current.
2. Wide input voltage range AC85V~AC265V available for worldwide requirements, convenient for electric-network fluctuation and vehicles exportation.
3. High efficiency, above 93%, while traditional chargers can meet only about 80% efficiency.
4. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
5. Fully-sealed and water-proof, protection class IP46. Shock resistance treatment made inside makes vibration-proof level up to SAEJ1378 that can fully meet the standard of automobile appliance usage.
6. Available for various kind of batteries like Lead-Acid, LiFePO4 etc., Flexible and programmable charging module. Ability to select 10 different Amp Hour or Cell Count settings. Equipped with CAN communication interface to realize real-time communication with BMS.
7. Includes one external AC cooling fan for long life.

Specification

 Spec
Model
Output Voltage
-Nominal
Output Voltage
-Maximum
Output Current
-Maximum
230vac
Output Current
-Maximum
115vac
 TCCH-48-40
48V
 66V
 
40A
29A
TCCH-60-35
60V
 
82V
 
35A
23A
TCCH-72-28
72V
 
96V
 
28A
19A
TCCH-84-25
 
84V
 
112V
 
25A
17A
TCCH-96-22
96V
 
130V
 
22A
14A
TCCH-120-18
 
120V
 
 
168V
 
18A
12A
TCCH-144-15
 
144V
 
192V
 
15A
10A
TCCH-168-12
 
168V
 
233V
 
12A
8A
TCCH-216-10
 
216V
 
289V
 
10A
6.5A
TCCH-288-7.5
 
288V
 
389V
 
7.5A
5A
TCCH-312-07 312V 417V 7A 5A

Technical Features

AC Input Voltage Range
AC85V~AC265V
AC Input Frequency
45~65 Hz
AC Power Factor
≥0.98
Full Load Efficiency
≥93
Mechanical Shock &
Vibration Resistance Level
Conformance to
SAEJ1378 Standard
EnvironmentalEnclosure
IP65
Operating Temperature
-40 +55℃
Storage Temperature
-40 +100℃
Mechanical Dimensions
352mm×195mm×139mm
Net Weight
7.07kg

LED Indicator

Red-Green flash
(one second interval)
Battery Disconnected
Red flash
(three seconds interval)
Repair Battery
Red flash
(one second interval)
<80% Charge Indicator
Yellow flash
(one second interval)
>80% Charge Indicator
Green flash
(one second interval)
100% Charge Indicator
 
Protection Features
 
1. Thermal Self-Protection: When the internal temperature of the charger exceeds 75, the charging current will reduce automatically. If exceeds 85℃, the charger will shutdown protectively. When the internal temperature drops, it will resume charging automatically. 
2. Short-circuit Protection: When the charger encounters unexpected short circuit across the output, charging will automatically stop. When fault removes, the charger will re-start in 10 seconds.
3. Reverse Connection Protection: When the battery is polarity reversed, the charger will disconnect the internal circuit and the battery, the charging will stop and avoid been damaged.
4. Input Low-voltage Protection: When the input AC Voltage is lower than 85V, the charger will shutdown protectively and automatically resume working after the voltage is normal again.

Making user selection (1-10)

1. There are 10 user selections of Amp Hour (battery size) or Cell Count (number of batteries) available.
2. When the charger is plugged in, the red LED flashes a number of times to indicate the present selection.
3. To change the selection, disconnect AC power, lift the bottom right corner of the Model Number label and hold down the black plastic button while connecting the AC power. Count the number of green flashes and release the button at the desired selection (1-10). The red LED will flash the same number of times to confirm your selection
 
Alarms

 
LED Flashing SequenceOne Cycle
Indication
1
R G _ _ _ _ _ _
Wrong Battery
2
R G R _ _ _ _ _
Overcharged
3
R G R G _ _ _ _
Battery Overheated
4
R G R G R _ _ _
Incorrect AC Input Voltage
5
R G R G R G _ _
External Thermal Sensor Fault
6
R G R G R G R _
Communication Interface Fault
7
G R _ _ _ _ _ _
Charger Overheated
8
G R G _ _ _ _ _
Charger Relay FaultRepair
9
G R G R _ _ _ _
Charger Fault; Repair
Stock Status N/A
Country of Manufacture China

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet