All Products
-
12-24 kW Marine Ratio Multiplier For NEMA 145TC Motors - Belt Drive
SUITABLE FOR IPM, ACI OR DUAL STATOR NEMA C-FACE MOTORS SUCH AS MOTENERGY ME1616, ME1302 OR HPEVS AC-35
$995.00 -
5-10kW Marine Ratio Multiplier For NEMA 145TC Motors - Belt Drive
SUITABLE FOR IPM, ACI OR SINGLE STATOR NEMA C-FACE MOTORS SUCH AS MOTENERGY ME1718, ME1803, ME1117 OR HPEVS AC-15
$895.00 -
AC-09 AC Induction Motor Drive Kit for Marine Craft
AC-09 AC Induction Motor Drive Kit for Marine Craft
Power: With a 48 Volt system you should expect to see as much as 28 horsepower and 65 ft-lbs. of torque at 600 Amp.Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks.
From: $2,940.00
To: $6,051.00
-
AC-12 AC Induction Motor Drive Kit for Marine Craft
AC-12 AC Induction Motor Drive Kit for Marine Craft
Power: Nearly 45 horsepower and 100 ft-lbs. of torque with a 96 volt/650 amp system.
Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks.
From: $2,940.00
To: $6,051.00
-
AC-34 / AC-35 AC Induction Motor Drive Kit for Marine Craft
AC-34 / AC-35 AC Induction Motor Drive Kit for Marine Craft
Power: Capable of producing 63 horsepower at 2900 RPM while delivering 129 ft-lbs. of torque at 96 volts, 650 amps.
Includes: Motor, Choice of Curtis Controller, Contactor, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks.
From: $3,965.00
To: $6,956.00
-
AC-50 / AC-51 AC Induction Motor Drive Kit for Marine Craft
AC-50 / AC-51 AC Induction Motor Drive Kit for Marine Craft
Power: The AC-50 motor is an 8" motor that is capable of producing 71 horsepower and 120 ft-lbs. of torque. The AC-51 is capable of 108 ft-lbs. of torque.
Includes: Motor, Choice of Curtis Controller, Contactor, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks.
From: $4,330.00
To: $7,273.50
-
Aluminum Gear Reducer 2:1, C-Face
ONLY FOR SMALL SINGLE STATOR NEMA C-FACE MOTORS SUCH AS MOTENERGY ME0909, ME0708, ME0709, ME1117, ME1118, ME1716, ME1717, ME1718, ME1719, AND HPEVS AC-9
$695.00 -
Aluminum Gear Reducer 3:1, C-Face
ONLY FOR SMALL SINGLE STATOR NEMA C-FACE MOTORS SUCH AS MOTENERGY ME0909, ME0708, ME0709, ME1117, ME1118, ME1716, ME1717, ME1718, ME1719, AND HPEVS AC-9
$695.00 -
Aluminum Gear Reducer 4:1, C-Face
ONLY FOR SMALL SINGLE STATOR NEMA C-FACE MOTORS SUCH AS MOTENERGY ME0909, ME0708, ME0709, ME1117, ME1118, ME1716, ME1717, ME1718, ME1719, AND HPEVS AC-9
$695.00 -
Aluminum Gear Reducer 5:1, C-Face
ONLY FOR SMALL SINGLE STATOR NEMA C-FACE MOTORS SUCH AS MOTENERGY ME0909, ME0708, ME0709, ME1117, ME1118, ME1716, ME1717, ME1718, ME1719, AND HPEVS AC-9
$695.00 -
Aluminum Gear Reducer 7:1, C-Face
ONLY FOR SMALL SINGLE STATOR NEMA C-FACE MOTORS SUCH AS MOTENERGY ME0909, ME0708, ME0709, ME1117, ME1118, ME1716, ME1717, ME1718, ME1719, AND HPEVS AC-9
$695.00