Emus BMS Cell Modules are single cell controllers that measure cell voltage and provide means of controlled dissipative balancing. Each Cell Module can also measure its own temperature, and is equipped with a special serial interface for communication with the main controller.

The Small model is optimized for lower capacity cells and can be used in applications with space constraints or on non-prismatic cells, like can (18650, 26650) and pouch cell arrays.

The basic design is for installation on <100 Ah prismatic cells. However, the tip can be detached to fit other arrangements where two M3 fasteners can be used instead.


Shunt characteristics:
 – RTOT= 4.1Ohm;
 – PMAX= 2W;
Max balancing current: 0.7A (limited by PMAX);
Operating voltage: 2.0V÷4.55V;
Operating temperature: -40°C ÷ +80°C;
Voltage measurement accuracy: ± 10mV;
Temperature measurement accuracy: ± 5°C;
Dimensions: 33.8x12x2.8 mm;
Wire length: 100mm;
Mounting hole: M8.
Stock Status In Stock
Country of Manufacture Lithuania

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet