EMUS BMS 10 W Cell Module (standard A/B) Pair

Be the first to review this product



Emus BMS Cell Modules are the single cell controllers that measure cell voltage and provide means of controlled dissipative balancing. Each Cell Module can also measure its own temperature and, and is equipped with a special serial interface for communication with the main controller.

The 10 W model is a standard solution, designed for convenient wiring and easy installation on higher-capacity prismatic cells. This model also has a possibility to connect an additional external temperature sensor for measuring the cell temperature.


EMUS BMS Cell Module 3A type A – 1 pcs.
EMUS BMS Cell Module 3A type-B – 1 pcs



Shunt characteristics:
 – RTOT= 1.35Ohm
 – PMAX= 10W
Max balancing current: 2,7A (limited by PMAX)
Operating voltage: 2.0V÷4.55V
Operating temperature: -40°C ÷ +80°C
Voltage measurement accuracy:± 10mV
Temperature measurement accuracy: ± 5°C
Dimensions: 75x30x15 mm
Wire length: 100mm
Mounting hole: M9
Stock Status No
Country of Manufacture Lithuania

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet