ELCON HK-J-H 132-32 3.3kW CAN Charger

Be the first to review this product


In Stock

ElCon HK-J-H 132-32 UHF 3.3KW IP67 CANbus charger

The HK-J series 3.3KW charger is designed for electric vehicle battery and battery management system
interface. The product not only has high efficiency, small size, high stability, long life and other advantages, but
also has a high degree of protection, highly reliable, full-featured protection and other features. The ideal power
source for charging electric vehicles. Built-in thermal sensing device gives thermal overload protection that is
automatically reset when cooled. Fully sealed encapsulation process, up to IP67 protection class, you can
employ in any difficult environment without causing failure.
Main features: Full casting process, air-cooled or water-cooled, can work reliably under conditions -40- + 60
Weight 3.9kg without heatsink or fan.


Input Voltage AC 85~265V
Frequency 45-65Hz
Input Current 16A
Power Factor 0.99 at over half power
Efficiency 94% at full power
Idle Power 5W

Weight 3.9kg without heatsink or fan.
Dimensions: 239.2 mm x 135.4 mm x 91.9 mm

Output CV / CT
Output Range 33-132V
Output current Limits Maximum 32A
Output Power 3300W @220vac or [email protected]
Voltage Accuracy ±1%
Current Accuracy ±2%
Ripple voltage 5%

12V Power Supply
Output Voltage 12.5V
Current Rating 5A
Current Accuracy ±2%
Max. Current 5.5A±0.5A
Output Power 62.5W
Ripple Voltage 1%

Input Overvoltage AC270±5V
Input Undervoltage AC80±5V
Output Overvoltage 1% over max voltage limit stops output
Output Undervoltage 5% below minimum voltage stops output
Output Overcurrent 1% over max. output current stops output
Over Temp. Protection 85deg C starts reduced power, over 90deg stops output
Short Circuit Protection Output stops
Reverse battery protection Blown Fuse
Ground Protection 0.1milliohms
CAN Com. Protection Communication failure stops output

CAN Communications CAN IDs E5, E7, E8 and E9
Baud Rate options 125Kbps、250Kbps、500Kbps
Terminating resistor Not included

Galvanic Isolation Input to output: 2000VAC 10mA input to ground: 2000VAC 10mA
Output to ground: 2000VAC 10mA, are 1min
Insulation Rating Input to output, the signal end of the housing 10M Europe, the test voltage 1000VDC
Electromagnetic Immunity Meet GB / T 18487.3-2001 11.3.1 Article
Electromagnetic noise Meet GB / T 18487.3-2001 11.3.2 Article
Harmonic Current Meet GB 17625.1-2003 Article
Inrush Current 6A
Current Rise Time 5S, overshoot 5%
Stop response time 100% to 10% 50mS, 100% to 0% 200mS
Protection Class IP67
Vibration Resistance 10-25Hz amplitude of 1.2mm, 25-500Hz 30m / s2, 8 hours a direction
Noise 60dB
MTBF 150000H
Working Environment Relative humidity 5% -95% non-condensing
Operating Temperature -40 ~ 60
Storage temperature -55 ~ +85
Over-temperature protection Stops when over 90deg C, resumes operating when cooled.

Stock Status In Stock
Country of Manufacture China

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet