PLEASE CONTACT US FOR AVAILABILTY PRIOR TO ORDERING. ELCON IS TRANSITIONING TO UHF CHARGERS, SO PFC CHARGERS MAY BECOME UNAVAILBLE AT ANY TIME.
These waterproof ElCon Chargers are true power factor correction chargers capable of being programmed for just about any battery chemistry. This allows you to have the optimal charging algorithm for your particular pack of batteries whether you are using AGM, Gel, Flooded SLA, Ni-Cad, NiMH, Lithium or any other rechargeable battery that may come on to the market in the future.
Please note: ElCon chargers are not user programmable. They must be programmed at the factory for your specific need. If you should decide after receiving the charger that you would like to have it reprogrammed for a different application, the charger must be sent back to Elecrtic Motorsport at your own expense. There is a reprogramming fee of $100 minimum and a 2-3 week wait.
Advantages
-Internal integrated PFC, no pollution to electric network, protect shocking on electric network from heavy current.
-Wide input voltage range AC85V~AC265V available for worldwide requirements, convenient for electric-network fluctuation and vehicles exportation.
-High with 93% above efficiency while only about 80% efficiency the traditional chargers can meet.
-Intelligent temperature compensation function in the charging process, preventing the damage to battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
-Fully-sealed and water-proof, protecTCCH-192-06tion class IP65. Shock resistance treatment made inside makes vibration proof level up to SAEJ1378 that can fully meet the standard of automobile appliance usage.
-Available for various kinds batteries like Lead-Acid, LiFePO4 Battery etc., Flexible and programmable of the charging module. Memory to store 10 unique algorithms with ability to switch between algorithms.
-Available with CAN communication interface for BMS-controlled charging.
Specifications
Output Power | Voltage Range | Input Voltage | ||
1.5kW | 48V | 18amp | 24-67VDC | 110VAC - Dual 220VAC |
1.5kW | 72V | 12amp | 60-90VDC | |
1.5kW | 96V | 10amp | 72-120VDC |
Spec
Model
|
Output Voltage
-Nominal
|
Output Voltage
-Maximum
230vac
|
Output Current
-Maximum
115vac
|
TCCH-24-40
|
24V
|
34V
|
40A
|
TCCH-36-33
|
36V
|
51V
|
33A
|
TCCH-48-25
|
48V
|
68V
|
25A
|
TCCH-60-20
|
60V
|
85V
|
20A
|
TCCH-72-16
|
72V
|
102V
|
16A
|
TCCH-96-12
|
96V
|
136V
|
12A
|
TCCH-120-10
|
120V
|
170V
|
10A
|
TCCH-144-08
|
144V
|
203V
|
8A
|
TCCH-156-07
|
156V
|
217V
|
7A
|
TCCH-192-06
|
192V
|
258V
|
6.2A
|
TCCH-240-05 | 240V | 340V | 5A |
Technical Features
AC Input Voltage Range
|
AC85V~AC265V
|
AC Input Frequency
|
45~65 Hz
|
AC Power Factor
|
≥0.98
|
Full Load Efficiency
|
≥93%
|
Mechanical Shock &
Vibration Resistance Level
|
Conformance to
SAEJ1378 Standard
|
Environmental Enclosure
|
IP65
|
Operating Temperature
|
-40℃~+55℃
|
Storage Temperature
|
-40℃~+100℃
|
Mechanical Dimensions
|
352mm×175mm×139mm
|
Net Weight
|
6.33kg
|
LED Indicator
Red-Green flash
(one second interval)
|
Battery Disconnected
|
Red flash
(three seconds interval)
|
Repair Battery
|
Red flash
(one second interval)
|
<80% Charge Indicator
|
Yellow flash
(one second interval)
|
>80% Charge Indicator
|
Green flash
(one second interval)
|
100% Charge Indicator
|
1. Thermal Self-Protection: When the internal temperature of the charger exceeds 75℃, the charging current will reduce automatically. If exceeds 85℃, the charger will shutdown protectively. When the internal temperature drops, it will resume charging automatically.
2. Short-circuit Protection: When the charger encounters nexpected short circuit across the output, charging will automatically stop. When fault removes, the charger will re-start in 10 seconds.
3. Reverse Connection Protection: When the battery is polarity reversed, the charger will disconnect the internal circuit and the battery, the charging will stop and avoid been damaged.
4. Input Low-voltage Protection: When the input AC Voltage is lower than 85V, the charger will shutdown protectively and automatically resume working after the voltage is normal again.
Choice of Charging Curve (curve 1~10)
|
LED Flashing Sequence(One Cycle)
|
Indication
|
1
|
R G _ _ _ _ _ _
|
Wrong Battery
|
2
|
R G R _ _ _ _ _
|
Overcharged
|
3
|
R G R G _ _ _ _
|
Battery Overheated
|
4
|
R G R G R _ _ _
|
Incorrect AC Input Voltage
|
5
|
R G R G R G _ _
|
External Thermal Sensor Fault
|
6
|
R G R G R G R _
|
Communication Interface Fault
|
7
|
G R _ _ _ _ _ _
|
Charger Overheated
|
8
|
G R G _ _ _ _ _
|
Charger Relay Fault;Repair
|
9
|
G R G R _ _ _ _
|
Charger Fault; Repair
|
Availability | Contact Us for Availability |
---|---|
Country of Manufacture | China |
For assistance with selecting the right components for your project, please use the appropriate form:
Land Vehicle Worksheet | |
Marine Craft Worksheet |