ELCON PFC5000 Charger 5kW, 36-312VDC

$1,985.00

Contact Us for Availability

Maximum number of characters: 25

Maximum number of characters: 50

* Required Fields

PLEASE CONTACT US FOR AVAILABILTY PRIOR TO ORDERING. ELCON IS TRANSITIONING TO UHF CHARGERS, SO PFC CHARGERS MAY BECOME UNAVAILBLE AT ANY TIME.

These waterproof ElCon Chargers are true power factor correction chargers capable of being programmed for just about any battery chemistry. This allows you to have the optimal charging algorithm for your particular pack of batteries whether you are using AGM, Gel, Flooded SLA, Ni-Cad, NiMH, Lithium or any other rechargeable battery that may come on to the market in the future.

Please note: ElCon chargers are not user programmable. They must be programmed at the factory for your specific need. If you should decide after receiving the charger that you would like to have it reprogrammed for a different application, the charger must be sent back to Elecrtic Motorsport at your own expense. There is a reprogramming fee of $100 minimum and a 2-3 week wait.

Advantages

-Internal integrated PFC, no pollution to electric network, protect shocking on electric network from heavy current.

-Wide input voltage range AC85V~AC265V available for worldwide requirements, convenient for electric-network fluctuation and vehicles exportation.

-High with 93% above efficiency while only about 80% efficiency the traditional chargers can meet.

-Intelligent temperature compensation function in the charging process, preventing the damage to battery caused by charge-off or charge due, greatly extending the lifespan of the battery.

-Fully-sealed and water-proof, protecTCCH-192-06tion class IP65. Shock resistance treatment made inside makes vibration-proof level up to SAEJ1378 that can fully meet the standard of automobile appliance usage.

-Available for various kinds batteries like Lead-Acid, LiFePO4 Battery etc., Flexible and programmable of the charging module. Memory to store 10 unique algorithms with ability to switch between algorithms.

-Available with CAN communication interface for BMS-controlled charging.


Specifications

Output Power Voltage Range Input Voltage
5kW 36-312VDC 110VAC or 220VAC

 

Spec
Model
Output Voltage
-Nominal
Output Voltage
-Maximum
Output Current
-Maximum
230vac
Output Current
-Maximum
115vac
TCCH-36-80 36V 51V 80A 50A
TCCH-48-70
48V
68V
70A
38A
TCCH-60-60
60V
85V
60A
30A
TCCH-72-50
72V
102V
50A
26A
TCCH-84-42
84V
119V
42A
22A
TCCH-96-36
96V
136V
36A
20A
TCCH-120-30
120V
170V
30A
15A
TCCH-144-24
144V
204V
24A
13A
TCCH-156-22
156V
221V
22A
12A
TCCH-192-18
192V
272V
18A
10A
TCCH-216-16
216V
289V
16A
8A
TCCH-288-15
288V
408V
15A
7.5A
TCCH-312-14
312V
417V
14A
7A
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Technical Features

AC Input Voltage Range
AC85V~AC265V
AC Input Frequency
45~65 Hz
AC Power Factor
≥0.98
Full Load Efficiency
≥93
Mechanical Shock &
Vibration Resistance Level
Conformance to
SAEJ1378 Standard
EnvironmentalEnclosure
IP65
Operating Temperature
-40 +55℃
Storage Temperature
-40 +100℃
Mechanical Dimensions
365mm×352mm×139mm
Net Weight
13.80kg

LED Indicator

Red-Green flash
(one second interval)
Battery Disconnected
Red flash
(three seconds interval)
Repair Battery
Red flash
(one second interval)
<80% Charge Indicator
Yellow flash
(one second interval)
>80% Charge Indicator
Green flash
(one second interval)
100% Charge Indicator
 
Protection Features
 
1. Thermal Self-Protection: When the internal temperature of the charger exceeds 75, the charging current will reduceautomatically. If exceeds 85℃, the charger will shutdown protectively. When the internal temperature drops, it will resume charging automatically. 
2. Short-circuit Protection: When the charger encounters unexpected short circuit across the output, charging will automatically stop. When fault removes, the charger will re-start in 10 seconds.
3. Reverse Connection Protection: When the battery is polarity reversed, the charger will disconnect the internal circuit and the battery, the charging will stop and avoid been damaged.
4. Input Low-voltage Protection: When the input AC Voltage is lower than 85V, the charger will shutdown protectively and automatically resume working after the voltage is normal again.

Choice of Charging Curve (curve 1~10) 

1. The LED will flash red several times when AC is first connected, then the LED will flash green once. The number of red flashes denotes the present curve. E.g. If the red flashes three times, it means the present curve is curve 3.
2. To choose another curve, please cut off the power supply first, then unpeel the label, pressing the button while connecting the power. If you want to choose curve 3, release the button after the 3rd LED Flash. Now the selected curve (e.g. curve 3) will be recorded in memory.
 
Alarms

 

 
LED Flashing Sequence One Cycle
Indication
1
R G _ _ _ _ _ _
Wrong Battery
2
R G R _ _ _ _ _
Overcharged
3
R G R G _ _ _ _
Battery Overheated
4
R G R G R _ _ _
Incorrect AC Input Voltage
5
R G R G R G _ _
Availability Contact Us for Availability
Country of Manufacture China

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet