Downloads
SOLD OUT. SEE ME1302 INSTEAD.
POWER: Output Power of 15 kW Continuous, 38 kW Peak
These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4.
Features
Quieter Operation
Improved durability
High 92% Efficiency
Smoother acceleration
Lighter weight (only 35 lbs.)
Low torque ripple at low speed
NEW Fully enclosed design
NEW Water cooled stators
NEW Sine/cosine speed sensor
NEW Anodized aluminum
NEW Protective phase terminals cover
Specifications
- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 120 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 180 Amps AC continuous (220 Amps DC into the motor control)
- Peak current: 480 Amps AC for 1 minute (660 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 100 Nm.
- Cooling: Water cooled (50% Glycol)
- Includes temperature sensor
Availability | Contact Us for Availability |
---|---|
Country of Manufacture | China |
For assistance with selecting the right components for your project, please use the appropriate form:
Land Vehicle Worksheet | |
Marine Craft Worksheet |