Motor
The ME0708 motor has the highest power/weight/dollar ratio available on the market for brushed PM motors. This motor is also a bolt-in replacement for the original Etek motor. The motor runs a little faster than the Perm and Lynch or Lemco motors.
- Brush-type Permanent Magnet DC motor.
- Light weight, high efficiency design.
- Designed for 24-48VDC battery operated equipment.
- 150 amps continuous at 48V (300 amps for 1 minute)
- Capable of 4.8 KW continuous and 15 KW for 1 minute.
- Totally open, fan cooled motor.
- Runs in either direction
Power: 8 cont-- 15 pk hp
Voltage: 48 Volt rated
Speed: 3700 rpm @ 48V unloaded
Size: 8" OD, 5.5" long (w/o shaft), Shaft: 7/8"x 1-3/4", 3/16" key
Weight: 28 lbs.
Controller
Choose from:
SR48300
SR48400
SR48500
SR48600
SR72300
SR72400
SR72500
Throttle
Choose from:
Curtis style PB-6 or PB-8 Pot Box Throttle
FP-6 style Foot Pedal
Domino Twist Grip throttle
Magura Twist Grip Throttle
0-5 kΩ Potentiometer Dial with Scale
Single Lever Marine Throttle (right or left hand)
Dual Lever Marine Throttle
Contactor
Contactors (also known as solenoids) are used to connect and disconnect main battery buss power. When it is time to turn your vehicle on or off, the contactor will engage or disengage the power at the flip of a switch. This is very usefull in an emergency situation when main power needs to be turned off quickly and easily.
When using an Alltrax controller, the contactor coil Voltage must match the nominal Voltage of your battery pack. It is highly recommended that an appropriate pre-charge resistor (included) and a coil spike suppression diode (included) be used with the contactor.
Switches
Choose from:
On/Off Ignition keyswitch with 2 keys
On/Off Toggle Switch - for Run Switch or Personality Mode Switch
Inertia Crash Sensor Switch
Emergency Disconnect Switch
Wire Kit
Wiring kit specifically designed for this drive kit.
Fuse Block
Matching fuse and holder
Add an optional Reversing Contactor if needed
Availability | In Stock |
---|---|
Country of Manufacture | United States |
For assistance with selecting the right components for your project, please use the appropriate form:
Land Vehicle Worksheet | |
Marine Craft Worksheet |