Downloads
Motor
The Motenergy ME1906 (ME0909) is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 30 seconds. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 30 seconds). Designed for battery operated equipment. It makes a great replacement for the original Etek motor because it has the same bolt pattern and is actually lighter in weight.
Power: 4 cont-- 12.8 pk hp
Voltage: 12-48 Volt rated
Speed: 2150-4850 rpm
Size: 6" OD, (w/o shaft)
Shaft: 7/8"x 1-3/4", 3/16" key
Weight: 24 lbs.
Voltage Constant: 0.0107
Revolutions per volt: 93.45 RPM
Torque Constant: 0.102 Nm/Amp
Generated Current: 9.8A per Nm
Controller
Choose from:
SR48300
SR48400
SR48500
SR48600
Throttle
Choose from:
Curtis style PB-6 or PB-8 Pot Box Throttle
FP-6 style Foot Pedal
Domino Twist Grip throttle
Magura Twist Grip Throttle
0-5 kΩ Potentiometer Dial with Scale
Single Lever Marine Throttle (right or left hand)
Dual Lever Marine Throttle
Contactor
Contactors (also known as solenoids) are used to connect and disconnect main battery buss power. When it is time to turn your vehicle on or off, the contactor will engage or disengage the power at the flip of a switch. This is very usefull in an emergency situation when main power needs to be turned off quickly and easily.
When using an Alltrax controller, the contactor coil Voltage must match the nominal Voltage of your battery pack. It is highly recommended that an appropriate pre-charge resistor (included) and a coil spike suppression diode (included) be used with the contactor.
Switches
Choose from:
On/Off Ignition keyswitch with 2 keys
On/Off Toggle Switch - for Run Switch or Personality Mode Switch
Inertia Crash Sensor Switch
Emergency Disconnect Switch
Wire Kit
Wiring kit specifically designed for this drive kit.
Fuse Block
Matching fuse and holder
Add an optional Reversing Contactor if needed
| Availability | No |
|---|---|
| Country of Manufacture | United States |
For assistance with selecting the right components for your project, please use the appropriate form:
 |
Land Vehicle Worksheet |
|---|---|
 |
Marine Craft Worksheet |
