Motenergy ME1114 Brushless Motor 24-72V, 5000RPM, 10 kW cont, 24 kW pk

Be the first to review this product


Quick Overview

Brushless Permanent Magnet Motor 

10 kW Cont, 24 kW Peak 

Voltage Range: 0-72V 

Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 72 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and Sine/Cosine Speed Sensor. It has two stators with a rotor in the center.

BRUSHLESS DESIGN = 0 maintenance.

POWER: Output Power of 10 kW Continuous, 24 kW Peak 

These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4.

Replaces Motenergy ME1012


Quieter Operation 
Improved durability 
High 92% Efficiency 
Smoother acceleration 
Lighter weight (only 35 lbs.) 
Low torque ripple at low speed
NEW Bi-directional fan for increased air flow
NEW Sine/cosine speed sensor 
NEW Aluminum fan cover
NEW Protective phase terminals cover


- 4 pole motor (8 magnets). 
- Phase to Phase winding resistance is 0.065 Ohms with 20 turns per phase. 
- Maximum recommended rotor speed: 5000 RPM 
- Voltage: 0 to 72 VDC input to the control 
- Torque constant of 0.12 Nm/A
- The Inductance Phase to Phase is 0.05 Milli-Henry
- Armature Inertia: 45 Kg Cm Squared 
- Current: 125 Amps AC continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control) 
- Weight: 35 pounds
- Peak Stall Torque: 60 ft lb.
- Cooling: Open Frame, Fan Cooled motor 

- Includes temperature sensor

Stock Status No
Country of Manufacture China

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet