Originally designed for Briggs & Stratton 4.5 HP continuous outboard boating applications. Brushless Permanent Magnet Synchronous motor otherwise known as BLDC or PMAC motor. Input voltage of 30-72 VDC. 100 amps continuous, up to 300 amps for 30 seconds. The phase resistance is very low at 10 milli-ohms, so it is 90% efficient. This motor has a built-in bi-directional cooling fan and internal temperature sensor. Motor weight is 22 pounds.
This motor is a direct replacement for the NEMA C 143T Etek (Briggs & Stratton) brushed DC motor. It is an Axial Air Gap permanent magnet motor. This technology offers a very compact unit with a high power to weight ratio.
Rotor position is tracked through a UVW hall sensor array, connected to a 5 pin Delphi connector.
This Brushless motor requires a 3 Phase 8 Pole PMAC controller.
These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. NOTE: We do not recommend the use of trapezoidal wave controllers with these motors. This may reduce their durability and efficiency, as well as void it's warranty.
Specifications
Power: 6 Hp continuous, 15 peak Hp
Voltage: 24-48V DC
Maximum Speed: 5000 RPM
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Bi-directional fan w/ aluminum cover
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Weight: 22 lbs
Manufacturer: Motenergy
P/N: ME1305 (ME0907)
Availability | No |
---|---|
Country of Manufacture | China |
For assistance with selecting the right components for your project, please use the appropriate form:
Land Vehicle Worksheet | |
Marine Craft Worksheet |