Downloads
Designed for long life, no brush maintenance. The motor is 92% efficient at voltages between 24 to 96 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and Sine/Cosine Speed Sensor. It has two stators with a rotor in the center.
BRUSHLESS DESIGN = 0 maintenance.
POWER: Output Power of 12 kW Continuous, 30 kW Peak
These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4.
Replaces Motenergy ME0913 (Old part number ME1115)
Features
Quieter Operation
Improved durability
High 92% Efficiency
Smoother acceleration
Lighter weight (only 35 lbs.)
Low torque ripple at low speed
Bi-directional fan for increased air flow
Sine/cosine speed sensor
Aluminum fan cover
Protective phase terminals cover
Specifications
- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Torque constant of 0.15 Nm/A
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor
Availability | Usually ships in 1-2 days. |
---|---|
Country of Manufacture | China |
For assistance with selecting the right components for your project, please use the appropriate form:
Land Vehicle Worksheet | |
Marine Craft Worksheet |