ME1202 Brushless Motor 24-72V, 6500 RPM, 10 kW cont, 24 kW pk, ATV / Golf Car / NEV Mount

Be the first to review this product

Regular Price: $1,200.00

Special Price: $850.00


Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 72 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and Sine/Cosine Speed Sensor. It has two stators with a rotor in the center.

BRUSHLESS DESIGN = No maintenance.

POWER: Output Power of 10 kW Continuous, 24 kW Peak 

These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4.


Quiet Operation 
Extremely durabe
High 84% Efficiency 
Smooth acceleration 
Light weight (only 36.3 lbs.) 
Low torque ripple at low speed
Sine/cosine speed sensor 
Air cooled (cast aluminum heat sink)


- Mounting Face: Mounts to Dana/Spicer differential
- 4 pole motor (8 magnets). 
- 20 turns per phase. 
- Maximum recommended rotor speed: 6500 RPM at 72V unloaded
- Voltage: 0 to 72 VDC input to the control 
- Torque constant of 0.12 Nm per Amp
- The inductance phase to phase is 0.05 milli-Henry
- Armature Inertia: 45 kg cm² 
- Current: 125 Amps AC continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control) 
- Weight: 36.3 pounds
- Peak Stall Torque: 60 ft lb.
- Cooling: Air cooled (cast aluminum heat sink)
- Includes temperature sensor

Stock Status N/A
Country of Manufacture China

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet