Motenergy ME0201014201 PMAC Motor, 24-72V, 6 hp cont, 19 hp pk

Be the first to review this product


Quick Overview

PMAC-SS 19 Hp Brushless PM DC


Designed for long life. No brush maintenance. The motor has peak efficiency of 90% at voltages between 24 to 72 VDC. Continuous current of 90 amps at 48 VDC. This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap.

Commutation is accomplished with an internal Hall Cell assembly, connected to the 6-pin external wire harness. 

This Brushless motor requires a 3 Phase 8 Pole PMAC controller. 

These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. NOTE: We do not recommend the use of square wave controllers with these motors. This may reduce durability and efficiency of the motor, as well as void it's warranty.


Power: 6 Hp continuous, 19 peak Hp 
Voltage: 24-72V DC 
Voltage Constant: 50 RPM/VDC.
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key 
Weight: 22 lbs 

Manufacturer: Motenergy 
P/N: ME0201014201

This is a direct replacement for the Motenergy LLC ME0201013001 Motor. The only difference is that the ME0201014201 has an internal temperature sensor.

Stock Status No
Country of Manufacture China

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet