AC-09 AC Induction Motor Drive Kit

Price as configured: $0.00

Quick Overview

Power: With a 48 Volt system you should expect to see as much as 28 horsepower and 65 ft-lbs. of torque at 600 Amp.

Applications: Golf cart, Motorcycle, Utility Vehicle, Mining Vehicle and Hydraulic Pump, Ground Support Equipment.

Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.

IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.

Motor*

AC-09 07.51 Induction Motor (Club Car Specific Motor 10 spline coupler with Graziano golf car style adaptor) +$1,980.00
AC-09 07.52 Induction Motor (19 spline coupler with Graziano style adaptor) +$1,980.00
AC-09 08.52 Induction Motor (19 spline. Dana or Team Industries differential Yamaha, E-Z-GO, Columbia, Tomberlin golf carts) +$1,980.00
AC-09 03.27 Induction Motor (C-Face Adaptor. NEMA C-face end plate 7/8" shaft w/ 3/16" key way) +$1,550.00
AC-09 05.02 Induction Motor (Mining Vehicle Motor. 3/4" shaft w/ 3/16" key way for brake end) +$1,855.00
AC-09 06.06 Induction Motor (Hydraulic Pump Motor. SAE "A" pump adaptor w/ SAE coupler integrated mounting plate) +$1,855.00
AC-09 37.51 Induction Motor (Club Car specific motor 10 spline coupler with Graziano golf car style adaptor. With automatic parking brake) +$1,750.00
AC-09 38.52 Induction Motor (19 spline Dana or Team Industries differential. Yamaha, E-Z-GO, Columbia, Tomberlin Golf Cars with automatic parking brake) +$1,750.00
AC-09 37.52 Induction Motor (19 Spline coupler with Graziano style adaptor. With automatic parking brake) +$1,750.00

Qty:

Controller*

Curtis ACF4A-48-450 +$1,065.00
Curtis ACF6A-48-650 +$1,265.00
Curtis ACF6A-80-450 +$1,200.00
Curtis 1238E-6521 Induction Motor Controller 48-80V 550A +$2,200.00
Curtis 1238SE-7971 Induction Motor Controller 72-96V 900A +$2,500.00

Qty:

Wire Harness*

Wire Harness for AC-Induction Motor Drive System +$425.00

Qty:

Display

None
Curtis 840 6-LED Dash Display +$150.00
Curtis 3140 LCD Display +$85.00

Qty:

Contactor

1 x TE Tyco Kilovac LEV200 48V 500A Sealed Contactor +$145.00

Throttle (note: Potentiometer 0-5 kΩ with Scale is only applicable to Pump Flange motors)

None
Curtis PB8 Style Pot Box +$130.00
Foot Pedal Throttle 0-5K Ohm Potentiometer (FP-6 Style) +$125.00
Domino 0-5 kΩ Twist-Grip Throttle +$120.00
Magura Twist Grip Throttle w/ Matching Grips +$95.00
Potentiometer 0-5 kΩ with Scale +$25.00
Wig-Wag Throttle 0-10kΩ +$160.00

Qty:

Other Accessories

1 x HPEVS Chiller Plate System for Curtis 1238 Series AC Controller +$350.00
1 x Aluminum Heatsink for Curtis 1238E and 1239E Controllers +$112.00
1 x ED250 Emergency Disconnect Switch +$45.00
1 x ED400 Emergency Disconnect Switch +$55.00
1 x Resettable Inertia Switch Crash Sensor +$49.00
1 x Curtis 1314-4402 PC Programming Kit (OEM) +$650.00
1 x NEMA 143/145 C-Face to SAE A Pump Adapter +$58.00

* Required Fields