ELCON 6.6kW HK-J CAN UHF Charger (Select Model)

THIS ITEM REQUIRES ADDITIONAL PROGRAMMING PRIOR TO SHIPPING. PLEASE ALLOW 1 WEEK OR MORE.

The HK-J series 6.6 kW charger is designed for electric vehicle battery and battery management system 
interface. The product not only has high efficiency, small size, high stability, long life and other advantages, but
 also has a high degree of protection, highly reliable, full-featured protection and other features. The ideal power 
source for charging electric vehicles. Built-in thermal sensing device gives thermal overload protection that is
 automatically reset when cooled. Fully sealed encapsulation process, up to IP67 protection class, you can
 employ in any difficult environment without causing failure.


Main features: Full casting process, air-cooled or water-cooled, can work reliably under conditions -40- + 60
 ºC.
 Weight is 7.75 kg without heatsink or fan.

Charger comes with mating connectors and wire.

SPECIFICATIONS:

INPUT
Input Voltage AC 85~265V
Frequency 45-65Hz
Input Current  ≤32 A
Power Factor 0.99 at over half power
Efficiency 93% at full power
Idle Power 10W

Weight 7.75 kg without heatsink or fan.
Dimensions: 353 mm x 230 mm x 160 mm

OUTPUT
Output CV / CT
Output Range 25-99 VDC
Output Power 6600W @220vac or 3300W@110VAC
Voltage Accuracy ±1%
Current Accuracy ±2%
Ripple voltage 5%

AUXILIARY OUTPUT
12 V Power Supply
Output Voltage 12.5 VDC
Current Rating 5 A
Current Accuracy ±2%
Max. Current 5.5 A ±0.5 A
Output Power 62.5 W
Ripple Voltage 1%

PROTECTION
Input Overvoltage 285 VAC ±5 V
Input Undervoltage 85 VAC ±5 V
Output Overvoltage 1% over max voltage limit stops output
Output Undervoltage 5% below minimum voltage stops output
Output Overcurrent 1% over max. output current stops output
Over Temp. Protection 85 ºC starts reduced power, over 90 ºC stops output
Short Circuit Protection Output stops
Reverse battery protection Blown Fuse
Ground Protection 0.1milliohms
CAN Com. Protection Communication failure stops output

COMMUNICATION
CAN IDs E5, E7, E8 and E9
Baud Rate options 125 kbps, 250 kbps or 500 kbps (factory preset)
Terminating resistor Not included

SAFETY
Galvanic Isolation Input to output: 2000 VAC 10 mA input to ground: 2000 VAC 10 mA
Output to ground: 2000 VAC 10 mA, are 1 min
Insulation Rating Input to output, signal end of housing 10M Europe, test voltage 1000 VDC
Electromagnetic Immunity Meet GB / T 18487.3-2001 11.3.1 Article
Electromagnetic noise Meet GB / T 18487.3-2001 11.3.2 Article
Harmonic Current Meet GB 17625.1-2003 6.7.1.1 Article
Inrush Current 6 A
Current Rise Time 5 S, overshoot 5%
Stop response time 100% to 10% 50 mS, 100% to 0% 200 mS
Protection Class IP67
Vibration Resistance 10-25 Hz amplitude of 1.2mm, 25-500 Hz 30m / s2, 8 hours a direction
Noise 60 dB
MTBF 150,000 Hrs.
Working Environment Relative humidity 5% -95% non-condensing
Operating Temperature -40 ºC ~ 60 ºC
Storage temperature －55 ºC ~ ＋85 ºC
Over-temperature protection Stops when over 90 ºC, resumes operating when cooled.