The QuiQ-dci combines the technology of a QuiQ 1000 battery charger with an integrated DC-DC power converter for the operation of vehicle accessories, such as lights, turning signals and entertainment devices. Integrating the two components saves on system integration, sourcing and inventory costs. The QuiQ-dci is well-suited as a charger for electric utility vehicles and low-speed electric vehicles.
Proven, Efficient Design
A proven power electronics design with 93% energy efficiency and sealed enclosure. The QuiQ-dci is designed to prevent damage from high vibration, extreme ambient temperatures, water, chemicals, and dust ingress. Built-in converter to power on-board accessories. Saves space, weight, and cabling.
Easy to Integrate
The QuiQ-dci can be equipped to go on-board, and is the same mechanical design as all other QuiQ series chargers. Clear display to indicate charging progress and completion. Uses battery maintenance tools for integrated charge cycle and event tracking.
Charge Quality
Charge profiles to precisely charge deep-cycle lead acid and lithium batteries. Developed in Delta-Q’s battery lab to balance charge time, battery life and application requirements. Can store 10 lab-validated charge profiles for specific brands or amp-hour ranges of lead acid and lithium motive battery packs.
Global Flexibility
Global AC input to be used anywhere in the world, and has comprehensive regulatory approvals, including CEC energy efficiency standards.
Specifications
Charger
Maximum DC Power Output: 1000W
Maximum DC Output Current: 12A
Maximum DC Output Voltage: 100V
Deep discharge recovery (minimum voltage): 18V
Maximum interlock current: 0.5A
Battery type: Lead acid (Wet / AGM / GEL)
Reverse polarity: Electronic protection with auto-reset
Short circuit: Electronic current limit
Built-in DC-DC Converter
Maximum power output: 400W
No-load power draw: < 0.7 W
Battery DC input voltage range: 50-130
DC output voltage: 13.5 +/- 0.7 V
Continuous / peak output current: 30 A / 60 A
Output connections: Switched, unswitched. Anderson PP75 Series 114958G1 Connector.
AC Input
AC input voltage range: 85-265 VAC
Nominal AC input voltage: 120 VAC / 230 VAC rms
AC input frequency: 45-65 Hz
Maximum / nominal AC input current: 12 A / 9.5 A @120 VAC; 5 A rms @230 VAC
Nominal AC power factor: >0.99 @ 120 VAC; >0.98 @ 230 VAC
Regulatory
Efficiency: 93% charger output; California Energy Commission (CEC) compliant
Safety: UL approved to UL1564 3rd Ed. and CSA 107.2, EN 60335-2-29. Designed to meet UL2202 1st Ed.
Emissions: FCC Part 15 / ICES 003 Class A, EN 55011
Immunity: EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-6-4
Mechanical
Dimensions: 28.0 x 24.6 x 11.0 cm (11 x 9.7 x 4.3”)
Weight: < 6 kg. (<13 lbs.)
AC input connector: IEC320/C14 (requires country-specific cord)
DC output connector: Anderson SBS50
Signals connector: Deutsch DT06-08SA
Environmental
Enclosure: IP66 (NEMA4)
Operating temperature: -30o C to +50o C (-22o F to 122o F) Derated at >30o C (86o F), <0o C (32o F)
Storage temperature: -400 C to +700 C (-400 F to 1580 F)
Includes: Charger w/ built-in DC-DC converter, Mating Deutsch Connector & Pins, Mating Anderson Powerpole Connectors & Contacts, Mating Anderson SBS Connector & Contacts, AC Power Cord
| Availability | In Stock |
|---|---|
| Country of Manufacture | China |
For assistance with selecting the right components for your project, please use the appropriate form:
 |
Land Vehicle Worksheet |
|---|---|
 |
Marine Craft Worksheet |
