Description
Designed for long life. No brush maintenance. The motor is 89% efficient at voltages between 48 to 120 VDC. Continuous current of 180 amps AC (220 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and Sine/Cosine Speed Sensor. It has two stators with a rotor in the center. The rotor is fitted with 180 ºC neodymium iron boron high quality magnets.
Fits vehicles with a Schafer, Dana/Spicer, Comex, or Team Industries differential with a 19 spline input shaft.
Compatible vehicles may Include:
E-Z-GO
Yamaha
Columbia Par Car
Garia
GEM Car
ZENN Car
Aixam
The above list are suggestions and not all models may be compatible. Be sure to check the motor technical drawing and compare to the measurements of your differential mounting face to verify that the motor will fit your vehicle.
Brushless design = No maintenance.
POWER:
- 12 kW Continuous, 37 kW Peak at 48 V
- 15 kW Continuous, 46 kW Peak at 96 V
These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4.
Features
Quiet Operation
Durable and reliable
High 89% Efficiency
Smooth acceleration
Light weight (only 43 lbs.)
Low torque ripple at low speed
Sine/cosine speed sensor
Air cooled (cast aluminum heat sink)
Specifications
- Mounting Face: Mounts to Dana/Spicer differential
- 4 pole motor (8 180 ºC neodymium iron boron high quality magnets)
- 20 turns per phase
- Rotor speed: 6000 RPM at 96 V unloaded (6500 RPM Peak)
- Voltage: 0 to 120 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The inductance phase to phase is 0.05 milli-Henry
- Armature Inertia: 45 kg cm²
- Current: 180 Amps AC continuous (220 Amps DC into the motor control)
- Peak current: 550 Amps AC for 1 minute (650 Amps DC into the motor control)
- Weight: 43 pounds
- Peak Stall Torque: 65 ft lb.
- Cooling: Air cooled (cast aluminum heat sink)
- Includes temperature sensor
| Availability | Usually ships in 1-2 days. |
|---|---|
| Country of Manufacture | United States |
For assistance with selecting the right components for your project, please use the appropriate form:
 |
Land Vehicle Worksheet |
|---|---|
 |
Marine Craft Worksheet |
