Motenergy ME1118 PMAC Motor, 24-72V, 6 hp cont, 19 hp pk

Be the first to review this product


This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap, otherwise known as PMAC motor. Commutation is acheived by an internal Sine/Cosine speed sensor. Input voltage of 24-72 VDC. 100 amps continuous, up to 300 amps for 30 seconds. This motor has a built-in bi-directional cooling fan and internal temperature sensor. Motor weight is 22.35 pounds.

This is a direct replacement for the Motenergy LLC ME0201013001 and ME0201014201 motors. It is also a bolt-in replacement for the Brigs & Staratton Etek motor.

This Brushless motor requires a 3 Phase 8 Pole PMAC controller. 

These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. NOTE: We do not recommend the use of square wave controllers with these motors. This may reduce durability and efficiency of the motor, as well as void it's warranty.


Quieter Operation
Improved durability 
High 90% Efficiency 
Smoother acceleration 
Light weight
Low torque ripple at low speed
NEW Bi-directional fan for increased air flow
NEW Sine/cosine speed sensor 
NEW Aluminum fan cover

Typical Applications

Go Karts


Power: 6 Hp continuous, 19 peak Hp 
Voltage: 24-72V DC 
Maximum RPM: 5000
Torque Constant: 1.6 in-lb/A
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key 
Line to Line resistance: 0.025 ohms
28 turns per phase
Weight: 22.35 lbs 

Manufacturer: Motenergy 
P/N: ME1118

Stock Status No
Country of Manufacture China

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet