Downloads
THIS MOTOR COUPLER IS ONLY AVAILABLE FOR 5 BOLT FLYWHEELS
A custom 5 bolt light weight aluminum flywheel is available to match the coupler (read below)
This VW air cooled billet aluminum transmission adapter will fit most 9 inch and 11 inch Warp motors, Kostov, ADC, HPEVS AC-35, Dual AC-35, AC-50, AC-51, AC-75, AC-76 systems. Very good choice when wanting to add a little flash to your conversion with this premium adapter. Built of 6061-T6 billet aluminum it comes with mounting hardware and coupler.
There are multiple coupler options so please specify: Year/Make/Model and whether you are using the stock flywheel or the EV West billet aluminum flywheel.
If adapting a Warp9 motor, a spacer is required.
NOTE: All couplers are machined to be an interference fit and must be heated on a hot plate to 600 degrees prior to installation on the motor shaft.
Fits:
All Beetles
Aircooled Porsches
Ghias
Squarebacks
Notchbacks
Things
Vans
Pickups
Trikes
Anything using the VW Transaxle, including Kit Cars
Dimensions 18.5 x 16 x 5 in.
----------
Optional Flywheel:
The EV West lightweight aluminum flywheel weighs only 5.25 pounds and can significantly reduce vibrations compared to stock flywheels. It is designed to work in a variety of applications that use the 5 Bolt Porsche Pattern coupler.
Pilot Bearing is included. There are additional options for a 200mm Solid Disc Exide Clutch as well as a 200mm Kennedy Stage II Pressure Plate. Please select the optional components from the drop down menu.
Note: All flywheels are machined to be an interference fit and must be heated on a hot plate to 600 degrees prior to installation on the motor coupler.
Availability | Special Order: Allow 2 to 6 Weeks |
---|---|
Country of Manufacture | United States |
For assistance with selecting the right components for your project, please use the appropriate form:
Land Vehicle Worksheet | |
Marine Craft Worksheet |