EV PARTS
-
AVC2 Active Vehicle Side Control Board Module
The AVC2 module is intended for conversion vehicles to improve the safety and compatibility with public J1772 charging stations.
$56.00 -
AVC2.r Active Vehicle Side Control Board Module
The AVC2 module is intended for conversion vehicles to improve the safety and compatibility with public J1772 charging stations.
This version (AVC2.r) is only for inlets with no built-in proximity resistor to ground
$56.00 -
Fuse Kit for 300-600W DC-DC Converters
DC-DC converters must be independently fused at both their input and output. This kit is suitable for 12V and 24V output DC-DC converters. DC-DC Fuse Kits Includes: Choice of AMG Fuse & & Fuse Holder (Output), ACG 8A Glass Fuse & & Fuse Holder (Input)
$56.00 -
-
-
-
-
-
-
-
-
CUI 20W DC-DC Converter 48V (18-75V) to 12V 1.6A
Isolated DC/DC Converter 12 VDC, 1.667 A, 20 W, 18 ~ 75 VDC Input Range
$69.00 -
-
-
EMUS G1 CAN Cell Group Module CGM022C+C
For large, high voltage, series connected battery packs. High capacity battery systems of multiple cell strings connected in parallel. Applications with high levels of electromagnetic noise.
$75.50 -
Jaw Coupling L099 7/8” Bore - 3/16” Key Set
Jaw coupling L099 7/8”bore - 3/16” key set including two bored/keyed halves with setscrews and one Buna-N insert.
$78.00 -
Generic 100A-Cont. Sealed Contactor - Choose Voltage
High quality, high current sealed contactor capable of 100 Amps continuous.
From: $79.00
To: $129.00
-
TE Tyco Kilovac LEV200 12V 500A Sealed Contactor With Economizer
High quality, high current sealed contactor capable of 500 Amps continuous. Includes stainless steel terminal hardware.
Tyco Part # LEV200AAANA
DO NOT USE WITH MOTOR CONTROLLERS ALREADY WITH ECONOMIZER PWM COIL DRIVER CIRCUIT
Regular Price: $165.00
Special Price: $85.00
-
-
-
-
-
-
TSL Battery Chargers for Lithium (Select Model)
Available in the following formats: 12V 6A | 24V 6A | 36V 6A | 48V 6A
From: $91.00
To: $119.00
-
Jaw Coupling L099 7/8” Bore - 3/16” Key to 5/8" 9 Spline Set
Jaw coupling L099 set including one 7/8” bore - 3/16” half with setscrew, one 5/8" 9 Spline half and one Buna-N insert.
$94.00 -
Motenergy ME0804 Brush Set / Holder (for ME1907, ME0708 and ME1908, ME0709)
Brush Set and Holder for ME0708 and ME0709 motors.
$95.00 -
Motenergy ME1013 Brush Set / Holder (for ME1003, ME1008, ME1007, and ME1004)
Brush set and holder for ME1003, ME1008, ME1007, and ME1004 motors.
$95.00 -
-
-
Curtis PB-6 Style 2-Wire Pot Box w/ Microswitch
Curtis PB-6 Style 2-Wire Pot Box w/ Microswitch
$110.00 -
-
-
-
Native Round 64mm Display
The Native LED display monitors basic motor and battery parameters of Borgwarner Sevcon Gen4 motor controllers
$120.00 -
Domino 0-5 kΩ Twist-Grip Throttle
Regular Price: $139.00
Special Price: $120.00
-
SW182 200A-Cont. Reversing (Change-over) Contactor w/Optional Kit
Our optional installation kit includes: Reversing (Change-over) Contactor - select Voltage, Contactor Coil Spike Supression Diodes, Heat Shrink Tubing, SPDT Rocker Switch and Housing, Quick Disconnect Spade Connectors, and Choice of Tinned Copper Terminal Lugs. Small gauge wire not included. Heavy Duty Welding Cable may also be purchased optionally, by the foot.
From: $120.00
To: $151.64
-
-
-
Alltrax FN-K1 Performance (Speed) Knob for SR Controllers
This item ships directly from Alltrax. Please allow 2-3 weeks for processing and production.
$125.00 -
