THESE CAN bus CHARGERS REQUIRE SPECIFIC CAN COMMANDS FROM A COMPATIBLE BMS TO OPERATE.
OEM Version with raw I/O cables only (no connectors)
The HK-J series 3.3KW charger is designed for electric vehicle battery with battery management systems, such as EMUS, Orion, Elithion. This product not only has high efficiency, small size, high stability, long life and other advantages, but
also has a high degree of protection, highly reliable, full-featured protection and other features. The ideal power
source for charging electric vehicles. Built-in thermal sensing device gives thermal overload protection that automatically resets after it cooled down. Fully sealed encapsulation process, up to IP67 protection class, it can
be used in harsh environments without failure.
Main features: Full casting process, air-cooled or water-cooled, can work reliably under -40- + 60º C ambient temperature.
Weight is 3.9 kg without heatsink or fan.
SPECIFICATIONS:
INPUT:
Input Voltage AC 95~265 V
Frequency 45-65 Hz
Input Current 16 A
Power Factor 0.99 at over half power
Efficiency 94% at full power
Idle Power 5 W
Weight 3.9 kg without heatsink or fan.
Dimensions: 239.2 mm x 135.4 mm x 91.9 mm
OUTPUT:
Output CV / CT
Output Range 110-440 V
Output current Limits Maximum 40 A
Output Power 3300 W @220vac or 1600 W@110 VAC
Voltage Accuracy ±1%
Current Accuracy ±2%
Ripple voltage 5%
Auxiliary OUTPUT:
12 V Power Supply
Output Voltage 12.5 V
Current Rating 5 A
Current Accuracy ±2%
Max. Current 5.5 A ±0.5 A
Output Power 62.5 W
Ripple Voltage 1%
PROTECTION:
Input Overvoltage: 270 VAC ±5V
Input Undervoltage: 80 VAC ±5V
Output Overvoltage: 1% over max voltage limit: stops output
Output Undervoltage: 5% below minimum voltage: stops output
Output Overcurrent: 1% over max. output current: stops output
Over Temp. Protection: 85º C starts reduced power, over 90º C: stops output
Short Circuit Protection: stops output
Reverse battery protection: Blown Fuse
Ground Protection: 0.1 mΩ
CAN Com. Protection Communication failure: stops output
COMMUNICATION:
CAN Protocol NO. 1430
CAN Baud Rate 250K
Charger Receiving CAN ID 0x1806E5F4
Charger Transmitting CAN ID 0x18FF50E5
Baud Rate options: 250 kbps
Terminating resistor: Not included
SAFETY:
Galvanic Isolation Input to output: 2000 VAC 10 mA input to ground: 2000 VAC 10 mA
Output to ground: 2000 VAC 10 mA, are 1 min
Insulation Rating Input to output: Signal end of the housing 10M Europe, the test voltage 1000 VDC
Electromagnetic Immunity Meet GB / T 18487.3-2001 11.3.1 Article
Electromagnetic noise Meet GB / T 18487.3-2001 11.3.2 Article
Harmonic Current Meet GB 17625.1-2003 6.7.1.1 Article
Inrush Current: 6A
Current Rise Time: 5S, overshoot 5%
Stop response time: 100% to 10% 50mS, 100% to 0% 200mS
Protection Class: IP67
Vibration Resistance: 10-25Hz amplitude of 1.2mm, 25-500Hz 30m / s2, 8 hours a direction
Noise: 60dB
MTBF: 150000H
Working Environment Relative humidity: 5% -95% non-condensing
Operating Temperature: -40 ~ 60
Storage temperature: －55 ~ ＋85
Over-temperature protection: Stops when over 90º C, resumes operation when cooled.
| Availability | In Stock |
|---|---|
| Country of Manufacture | China |
For assistance with selecting the right components for your project, please use the appropriate form:
 |
Land Vehicle Worksheet |
|---|---|
 |
Marine Craft Worksheet |
