Downloads
These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4.
Features
Quiet Operation
Excellent durability
High 92% Efficiency
Smooth acceleration
Light weight (only 35 lbs.)
Low torque ripple at low speed
Fully enclosed design
Water cooled stators
Sine/cosine speed sensor
Anodized aluminum
Protective phase terminals cover
Temperature Sensor
Specifications
Power: 15 kW Cont. / 38 kW Pk.
4 pole motor (8 magnets).
Phase to Phase winding resistance: 0.013 Ohms
Maximum recommended rotor speed: 6500 RPM
Voltage: 0 to 120 VDC input to the control
Torque constant of 0.15 Nm per Amp
The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
Armature Inertia: 45 Kg Cm Squared
Current: 180 Amps AC continuous (220 Amps DC into the motor control)
Peak current: 480 Amps AC for 1 minute (660 Amps DC into the motor control)
Weight: 35 pounds
Peak Stall Torque: 100 Nm.
Cooling: Water cooled (50% Glycol)
Availability | In Stock |
---|---|
Country of Manufacture | China |
For assistance with selecting the right components for your project, please use the appropriate form:
Land Vehicle Worksheet | |
Marine Craft Worksheet |