Sale

Motenergy ME1118 PMAC Motor, 24-72V, 6 hp cont, 19 hp pk

$615.00

The ME1118 is a 3-phase, Y-connected Permanent Magnet Synchronous motor with an axial air gap, otherwise known as PMAC motor. Commutation is done electronically at the motor controller receiving rotor position information from an internal Sine/Cosine speed sensor. Input voltage of 24-72 VDC. 100 amps continuous, up to 300 amps for 1 minute. This motor has a built-in bi-directional cooling fan and internal temperature sensor. Motor weight is 22.35 pounds.

This Brushless motor is wound with 28 turns, same as the Motenergy LLC ME0201014201 motors. Requires a 3 Phase 8 Pole PMAC motor controller with support for sine/cosine encoder as rotor position sensor.

This patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. NOTE: We do not recommend the use of square wave controllers with these motors. This may reduce durability and efficiency of the motor, as well as void it's warranty.

Fearures

Quieter Operation
Improved durability 
High 90% Efficiency 
Smoother acceleration 
Light weight
Low torque ripple at low speed
NEW Bi-directional fan for increased air flow
NEW Sine/cosine speed sensor 
NEW Aluminum fan cover


Typical Applications

Marine
Motorcycles
Go Karts
Robotics
Automation
Mining

Specifications

Power: 6 hp continuous, 19 hp peak 
Voltage: 24-72V DC 
Maximum rpm: 5000
Torque Constant: 1.6 in-lb/A
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key 
Line to Line resistance: 0.025 Ω
28 turns per phase
Weight: 22.35 lbs 

Manufacturer: Motenergy 
P/N: ME1118

Availability No
Country of Manufacture China

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet