AC-34 / AC-35 AC Induction Motor Drive Kit

Motor*

• AC-34 16.02 Induction Motor (19 Spline. Dana/Spicer or Team Industries differential)   +$2,205.00
• AC-34 19.02 Induction Motor (19 Spline. Taylor-Dunn style differential w/ enclosed housing)   +$2,205.00
• AC-34 26.25 Induction Motor (B-Face. 1 1/8" keyed shaft)   +$2,310.00
• AC-34 26.34 Induction Motor (B-Face vented. 1 1/8" keyed stub shaft with 7/8" auxiliary shaft)   +$2,310.00
• AC-34 27.25 Induction Motor (B-Face. 1 1/8" keyed shaft w/ enclosed housing)   +$2,310.00
• AC-34 28.25 Induction Motor (C-Face. 1 1/8" keyed shaft)   +$2,310.00
• AC-34 28.34 Induction Motor (C-Face vented. 1 1/8" keyed stub shaft with 7/8" auxiliary shaft)   +$2,310.00
• AC-35 16.02 Induction Motor (19 Spline. Dana/Spicer or Team Industries differential)   +$2,205.00
• AC-35 19.02 Induction Motor (19 Spline. Taylor-Dunn style differential w/ enclosed housing)   +$2,205.00
• AC-35 26.25 Induction Motor (B-Face. 1 1/8" keyed shaft)   +$2,310.00
• AC-35 26.34 Induction Motor (B-Face vented. 1 1/8" keyed stub shaft with 7/8" auxiliary shaft)   +$2,310.00
• AC-35 27.25 Induction Motor (B-Face. 1 1/8" keyed shaft w/ enclosed housing)   +$2,310.00
• AC-35 28.25 Induction Motor (C-Face. 1 1/8" keyed shaft)   +$2,310.00
• AC-35 28.34 Induction Motor (C-Face vented. 1 1/8" keyed stub shaft with 7/8" auxiliary shaft)   +$2,310.00

Qty: 

Controller*

• Curtis 1238E-6521 Induction Motor Controller 48-80V 550A   +$2,200.00
• Curtis 1238SE-7971 Induction Motor Controller 72-96V 900A   +$2,500.00
• Curtis ACF6A-80-450   +$1,200.00
• Curtis ACF6A-48-650   +$1,265.00

Qty: 

Wire Harness*

Wire Harness for AC-Induction Motor Drive System   +$425.00

Qty: 

Display

• None
• Curtis 840 6-LED Dash Display   +$150.00
• Curtis 3140 LCD Display   +$85.00

Qty: 

Contactor (Select 12V for 144V Controller, or 48V for all others)

• 1 x TE Tyco Kilovac LEV200 12V 500A Sealed Contactor   +$145.00
• 1 x TE Tyco Kilovac LEV200 48V 500A Sealed Contactor   +$145.00

Throttle (note: Potentiometer 0-5 kΩ with Scale is only applicable to Pump Flange motors)

• None
• Curtis PB8 Style Pot Box   +$130.00
• Foot Pedal Throttle 0-5K Ohm Potentiometer (FP-6 Style)   +$125.00
• Foot Pedal Throttle 0-5V Hall Effect (FP-6 Style)   +$125.00
• Domino 0-5 kΩ Twist-Grip Throttle   +$120.00
• Magura Twist Grip Throttle w/ Matching Grips   +$95.00
• Potentiometer 0-5 kΩ with Scale   +$25.00

Qty: 

Other Accessories

• 1 x HPEVS Chiller Plate System for Curtis 1238 Series AC Controller   +$350.00
• 1 x Aluminum Heatsink for Curtis 1238E and 1239E Controllers   +$112.00
• 1 x ED250 Emergency Disconnect Switch   +$45.00
• 1 x ED400 Emergency Disconnect Switch   +$55.00
• 1 x Resettable Inertia Switch Crash Sensor   +$49.00
• 1 x Curtis 1314-4402 PC Programming Kit (OEM)   +$650.00

* Required Fields