ELCON PFC4000 Charger 4kW, 36-156VDC

Be the first to review this product

$1,499.00

Maximum number of characters: 25

Maximum number of characters: 50

* Required Fields

These waterproof ElCon Chargers are true power factor correction chargers capable of being programmed for just about any battery chemistry. This allows you to have the optimal charging algorithm for your particular pack of batteries whether you are using AGM, Gel, Flooded SLA, Ni-Cad, NiMH, Lithium or any other rechargeable battery that may come on to the market in the future.

Please note: ElCon chargers are not user programmable. They must be programmed at the factory for your specific need. If you should decide after receiving the charger that you would like to have it reprogrammed for a different application, the charger must be sent back to Elecrtic Motorsport at your own expense. There is a reprogramming fee of $100 minimum and a 2-3 week wait.

Advantages

-Internal integrated PFC, no pollution to electric network, protect shocking on electric network from heavy current.

-Wide input voltage range AC85V~AC265V available for worldwide requirements, convenient for electric-network fluctuation and vehicles exportation.

-High with 93% above efficiency while only about 80% efficiency the traditional chargers can meet.

-Intelligent temperature compensation function in the charging process, preventing the damage to battery caused by charge-off or charge due, greatly extending the lifespan of the battery.

-Fully-sealed and water-proof, protecTCCH-192-06tion class IP65. Shock resistance treatment made inside makes vibration-proof level up to SAEJ1378 that can fully meet the standard of automobile appliance usage.

-Available for various kinds batteries like Lead-Acid, LiFePO4 Battery etc., Flexible and programmable of the charging module. Memory to store 10 unique algorithms with ability to switch between algorithms. Equipped with CAN communication interface to realize real-time communication with BMS.

Specifications

Output Power Voltage Range Input Voltage
4kW 36-156VDC 110VAC or 220VAC

Spec
Model
Output Voltage
-Nominal
Output Voltage
-Maximum
Output Current
-Maximum
230vac
Output Current
-Maximum
115vac
TCCH-36-80
36V
51V
80A
 50A
TCCH-48-70
48V
68V
70A
 37A
TCCH-60-60
60V
85V
60A
 30A
TCCH-72-50
72V
102V
50A
 26A
TCCH-84-42 84V 119V 42A 22A
TCCH-96-36
96V
136V
36A
 19A
TCCH-120-30
120V
170V
30A
 15A
TCCH-144-24
144V
204V
24A
 13A
TCCH-156-22
156V
217V
22A
 11A
TCCH-192-18 192V 272V 18A 9A
TCCH-288-12 288V 408V 12A 6A
TCCH-312-11 312V 417V 11A 5.5A
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Technical Target

AC Input Voltage Range
AC85V~AC265V
AC Input Frequency
45~65 Hz
AC Power Factor
≥0.98
Full Load Efficiency
≥93
Mechanical Shock &
Vibration Resistance Level
Conformance to
SAEJ1378 Standard
EnvironmentalEnclosure
IP65
Operating Temperature
-40 +55℃
Storage Temperature
-40 +100℃
Mechanical Dimensions
352mm×252mm×168mm
Net Weight
10.24kg
 

LED Indicator

Red-Green flash
(one second interval)
Battery Disconnected
Red flash
(three seconds interval)
Repair Battery
Red flash
(one second interval)
<80% Charge Indicator
Yellow flash
(one second interval)
>80% Charge Indicator
Green flash
(one second interval)
100% Charge Indicator
 
 
Protection Features
 
1.Thermal Self-Protection: When the internal temperature of the charger exceeds 75, the charging current will reduceautomatically. If exceeds 85℃, the charger will shutdown protectively. When the internal temperature drops, it will resume charging automatically. 
2. Short-circuit Protection: When the charger encounters unexpected short circuit across the output, charging will automatically stop. When fault removes, the charger will re-start in 10 seconds.
3. Reverse Connection Protection: When the battery is polarity reversed, the charger will disconnect the internal circuit and the battery, the charging will stop and avoid been damaged.
4. Input Low-voltage Protection: When the input AC Voltage is lower than 85V, the charger will shutdown protectively and automatically resume working after the voltage is normal again.

Choice of Charging Curve (curve 1~10) 

1.The LED will flash red several times when AC is first connected, then the LED will flash green once. The number of red flashes denotes the present curve (e.g. If the red flashes three times, it means the present curve is curve 3).
2. To choose another curve, please cut off the power supply first, then unpeel the label, pressing the button while connecting the power. If you want to choose curve 3, release the button after the 3rd LED Flash. Now the selected curve (e.g. curve 3) will be recorded in memory. 

 

Alarms

 
LED Flashing SequenceOne Cycle
Indication
1
R G _ _ _ _ _ _
Wrong Battery
2
R G R _ _ _ _ _
Overcharged
3
R G R G _ _ _ _
Battery Overheated
4
R G R G R _ _ _
Incorrect AC Input Voltage
5
R G R G R G _ _
External Thermal Sensor Fault
6
R G R G R G R _
Communication Interface Fault
7
G R _ _ _ _ _ _
Charger Overheated
8
G R G _ _ _ _ _
Charger Relay Fault Repair
9
G R G R _ _ _ _
Stock Status N/A
Country of Manufacture China

Only registered users can write reviews. Please, log in or register

For assistance with selecting the right components for your project, please use the appropriate form:

LVW Land Vehicle Worksheet
MCW Marine Craft Worksheet