All Products
-
168V to 312V HK-J-H440-10 (110-440V) 10A TC OEM 3.3kW CAN Charger
3.3 kW TC OEM CAN Charger
THESE CAN bus CHARGERS REQUIRE SPECIFIC CAN COMMANDS FROM A COMPATIBLE BMS TO OPERATE.
OEM Version with unterminated I/O cables only (no connectors)
$550.00 -
AC-09 AC Induction Motor Drive Kit
Power: With a 48 Volt system you should expect to see as much as 28 horsepower and 65 ft-lbs. of torque at 600 Amp.
Applications: Golf cart, Motorcycle, Utility Vehicle, Mining Vehicle and Hydraulic Pump, Ground Support Equipment.
Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $3,040.00
To: $6,706.00
-
AC-09 AC Induction Motor Drive Kit for Marine Craft
AC-09 AC Induction Motor Drive Kit for Marine Craft
Power: With a 48 Volt system you should expect to see as much as 28 horsepower and 65 ft-lbs. of torque at 600 Amp.Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks.
From: $3,040.00
To: $6,826.00
-
AC-09 Induction Motors - Choose type: C-Face, Graziano, Dana, Team, SAE Pump, Mining
Motor Only. Click here for the complete kit with the motor, controller, and wire harness.
IMPORTANT: This is a made-to-order motor. Standard Lead time is 6-8 weeks.
From: $1,550.00
To: $1,980.00
-
AC-12 AC Induction Motor Drive Kit
Power: Nearly 45 horsepower and 100 ft-lbs. of torque with a 96 volt/650 amp system.
Applications: Golf Carts, Motorcycle, Utility Vehicle, Mining Vehicle and Ground Support Equipment.
Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $3,040.00
To: $6,591.00
-
AC-12 AC Induction Motor Drive Kit for Marine Craft
AC-12 AC Induction Motor Drive Kit for Marine Craft
Power: Nearly 45 horsepower and 100 ft-lbs. of torque with a 96 volt/650 amp system.
Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks.
From: $3,040.00
To: $6,826.00
-
AC-12 Induction Motors - Choose type: C-Face, Graziano, Dana, or Team
Motor Only. Click here for the complete kit with the motor, controler and wire harness.
IMPORTANT: This is a made-to-order motor. Standard Lead time is 6-8 weeks.
From: $1,550.00
To: $1,980.00
-
AC-20 / AC-23 AC Induction Motor Drive Kit
Power: This motor produces 65 horsepower, up to 5100 RPM, and 82 ft./lbs. of torque at 96 volts/650 amps.
Applications: Golf Cart, Motorcycle, Utility Vehicle, Hydraulic Pump, Mining Vehicle, and Ground Support Equipment.
Includes: Choice of Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $3,450.00
To: $7,376.00
-
AC-20 / AC-23 Induction Motors - Choose type: C-Face, Graziano, Dana, Team, SAE Pump, Mining
Motor Only. Click here for the complete kit with the motor, controler and wire harness.
IMPORTANT: This is a made-to-order motor. Standard Lead time is 6-8 weeks.
From: $1,960.00
To: $2,535.00