All Products
-
CUI 20W DC-DC Converter 48V (18-75V) to 12V 1.6A
Isolated DC/DC Converter 12 VDC, 1.667 A, 20 W, 18 ~ 75 VDC Input Range
$69.00 -
Lithium Battery Charger - Single Cell 3.55V 15A (No CANbus) - Rental
CONTACT FOR AVAILABILITY.
7 DAY RENTAL @ $50.00. FULL DEPOSIT REQUIRED. USA ONLY.
GBS-TSL3-15TSL Series Lithium battery chargers have a charging program consisting of 3 steps: constant current, constant voltage and float charging. TSL chargers provide protections against overload, over-voltage, over-heating, short circuit and reverse polarity connections. However, TSL chargers are not power factor corrected. They do not have communication port with BMS system, and they will have to be controlled by external contactor for over-charging protection.$156.00 -
-
-
-
EMUS G1 Centralized (CCGM) Kit
From: $777.00
To: $1,454.00
-
-
-
-
-
-
-
-
ME1302 Liquid-Cooled Motor Drive System 48-96V (350A or 550A)
IMPORTANT: This is a made-to-order drive system that may require an additional 4-6 weeks for production. If you need it fast, please inquire about current production times prior to ordering. Please also note that some components within the drive system may be different than what is pictured on this webpage as the item undergoes periodic revision.
$2,880.00 -
Rover Motor Adapter w/ Hub & Hardware for 9" Motors
All adapters retain use of original clutch and fit HPEV AC35 and up, WARP and ADC Motors with B-Face and 1 1/8″ keyed shaft. Some adapter plates may have more or less bolt holes than your make and model of vehicle requires. As some adapters span a broad range of model years the adapter is designed to have enough bolt holes to be compatible with all model designs.
Made in Canada$1,720.00 -
-
-
-
-
-
-
-
-
-
AC-20 / AC-23 AC Induction Motor Drive Kit
Power: This motor produces 65 horsepower, up to 5100 RPM, and 82 ft./lbs. of torque at 96 volts/650 amps.
Applications: Golf Cart, Motorcycle, Utility Vehicle, Hydraulic Pump, Mining Vehicle, and Ground Support Equipment.
Includes: Choice of Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $3,450.00
To: $7,349.00
-
AC-34 / AC-35 AC Induction Motor Drive Kit
Power: Capable of producing 63 horsepower at 2900 RPM while delivering 129 ft-lbs. of torque at 96 volts, 650 amps.
Applications: Applications: Light Automotive, Motorcycle, Hydraulic Pump, Mining Vehicle and Ground Support Equipment.
Includes: Motor, Choice of Curtis Controller, Contactor, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $3,830.00
To: $7,066.00
-
AC-50 / AC-51 AC Induction Motor Drive Kit
Power: The AC-50 motor is an 8" motor that is capable of producing 71 horsepower and 120 ft-lbs. of torque. The AC-51 is capable of 108 ft-lbs. of torque.
Applications: Automotive, Utility Vehicle, Mining Vehicles and Ground Support Equipment. Designed for use in automotive applications with a curb weight of 3500 lbs or less.
Includes: Motor, Choice of Curtis Controller, Contactor, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $4,115.00
To: $7,596.50
-
Sevcon PCpaK Programming Environment (Rental) 662/14039
7 DAY RENTAL @ $100.00. FULL DEPOSIT REQUIRED. USA ONLY.
$1,000.00 -
Alithium 48V - 50Ah 8 Cell Modules Li-Ion Battery - EMUS BMS Mini & Charger
Alithium battery packages come complete with 8 Cell Alithium Battery Modules, EMUS BMS Mini, and Charger. The EMUS BMS Mini can manage 6 to 16 50 Ah cells. Batteries are on sale!
$1,589.00 -
Bussman AMG 40A Fuse
AMG 40A fuse. 5/16" terminal holes. Can be used to fuse the output of a 12V 500W DC-DC converter.
$15.00 -
Fuse Kit for 300-600W DC-DC Converters
DC-DC converters must be independently fused at both their input and output. This kit is suitable for 12V and 24V output DC-DC converters. DC-DC Fuse Kits Includes: Choice of AMG Fuse & & Fuse Holder (Output), ACG 8A Glass Fuse & & Fuse Holder (Input)
$56.00 -
Isolated 600W DC-DC Converters 48V, 60/72V, 96V, 108V, 144V to 12V 50A (Select Model)
Choose From:
Isolated DC-DC Converter 600W 48V to 13.8V 50A
Isolated DC-DC Converter 600W 60-72V to 13.8V 50A
Isolated DC-DC Converter 600W 96-108V to 13.8V 50A
Isolated DC-DC Converter 600W 144V to 13.8V 50A$200.00 -
ElCon 72-144V to 12V 1000W DC-DC Converters (Select Model)
Choose from:
ElCon 1000 W 72 V to 13.8 V IP67 DC-DC Converter TDC-1
ElCon 1000 W 96 V to 13.8 V IP67 DC-DC Converter TDC-1
ElCon 1000 W 144 V to 13.8 V IP67 DC-DC Converter TDC-1$490.00 -
AC-12 AC Induction Motor Drive Kit
Power: Nearly 45 horsepower and 100 ft-lbs. of torque with a 96 volt/650 amp system.
Applications: Golf Carts, Motorcycle, Utility Vehicle, Mining Vehicle and Ground Support Equipment.
Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $3,040.00
To: $6,591.00
-
AC-09 AC Induction Motor Drive Kit
Power: With a 48 Volt system you should expect to see as much as 28 horsepower and 65 ft-lbs. of torque at 600 Amp.
Applications: Golf cart, Motorcycle, Utility Vehicle, Mining Vehicle and Hydraulic Pump, Ground Support Equipment.
Includes: Motor, Choice of Curtis Controller, Wire Harness, and Curtis 840 Dash Gauge.
IMPORTANT: This is a made-to-order drive kit. Standard Lead time is 6-8 weeks. However, as of 03/27/24 lead time on Curtis controllers is approximately 14 weeks.
From: $3,040.00
To: $6,679.00
-
Curtis 1238E-6521 Induction Motor Controller 48-80V 550A
Curtis 1238E-6521 Induction Motor Controller 48-80V 550A
$2,200.00 -
-
-
-
-
-
-
-
Power Cable Wiring Kit for 40Ah / 60Ah / 100Ah GBS Battery Packs
From: $107.10
To: $212.90
Out of stock
Add to wishlist Add to compare -
-
-
Motenergy ME1912 (ME1008) Enclosed PMDC Motor 12-72VDC 6.4kW Cont. 20kW Pk.
This ME1008 (ME1912) is a Brush-Type, Permanent Magnet DC motor. It is the totally enclosed version of the ME1003.
Regular Price: $850.00
Special Price: $770.00
-
Alltrax FN-KS Performance (Personality & Speed / Regen) Knob for XCT Controllers
This item ships directly from Alltrax. Please allow 2-3 weeks for processing and production.
$142.00 -
Alltrax FN-KEY User Controls (Key & Regen) for XCT Controllers
This item ships directly from Alltrax. Please allow 2-3 weeks for processing and production.
$157.00 -
EPS 48V 10KWh Li-Ion Integrated Home Energy Storage System
The EPS integrated energy storage system features a 48V 10KWh Lithium Ion battery pack. Multiple units can be put in parallel to add more capacity.
$8,133.00 -
-
-
Jeep 2.5L / 4.0L / 4.2L Motor Adapter w/ Hub & Hardware for 9" Motors
Download the correct PDF document with dimensional drawing. Please verify adapter plate will work for your vehicle year and model before ordering it.
Special order item with a minumum 6-8 week lead time. All sales of this item are final. Please contact us for applicability and availablilty.
$1,720.00 -
FORD Adapter Plate w/ Hub for WARP and HPEVS Electric Motors
All adapters retain use of original clutch and fit HPEV AC35 and up, WARP and ADC Motors with B-Face and 1 1/8″ keyed shaft. Some adapter plates may have more or less bolt holes than your make and model of vehicle requires. As some adapters span a broad range of model years the adapter is designed to have enough bolt holes to be compatible with all model designs.
Download the correct PDF document with dimensional drawing. Please verify adapter plate will work for your vehicle year and model before ordering it.
Special order item with a minumum 6-8 week lead time. All sales of this item are final. Please contact us for applicability and availablilty.
$1,720.00 -
MAZDA Adapter Plate w/ Hub for WARP and HPEVS Electric Motors
All adapters retain use of original clutch and fit HPEV AC35 and up, WARP and ADC Motors with B-Face and 1 1/8″ keyed shaft. Some adapter plates may have more or less bolt holes than your make and model of vehicle requires. As some adapters span a broad range of model years the adapter is designed to have enough bolt holes to be compatible with all model designs.
Download the correct PDF document with dimensional drawing. Please verify adapter plate will work for your vehicle year and model before ordering it.
Special order item with a minumum 6-8 week lead time. All sales of this item are final. Please contact us for applicability and availablilty.
$1,720.00 -
CHEVROLET Adapter Plate w/ Hub for WARP and HPEVS Electric Motors
All adapters retain use of original clutch and fit HPEV AC35 and up, WARP and ADC Motors with B-Face and 1 1/8″ keyed shaft. Some adapter plates may have more or less bolt holes than your make and model of vehicle requires. As some adapters span a broad range of model years the adapter is designed to have enough bolt holes to be compatible with all model designs.
Download the correct PDF document with dimensional drawing. Please verify adapter plate will work for your vehicle year and model before ordering it.
Special order item with a minumum 6-8 week lead time. All sales of this item are final. Please contact us for applicability and availablilty.
$1,720.00 -
Alltrax FN-K2 Performance (Speed & Regen) Knob for XCT Controllers
This item ships directly from Alltrax. Please allow 2-3 weeks for processing and production.
$142.00 -
Alltrax FN-K1 Performance (Speed) Knob for SR Controllers
This item ships directly from Alltrax. Please allow 2-3 weeks for processing and production.
$125.00 -
Alltrax SR/XCT Hi-Reliability Fan Panel
This item ships directly from Alltrax. Please allow 2-3 weeks for processing and production.
$49.00 -
